Hoop Iron
Various solutions for Type A and Type B bracing and general strapping requirements made from galvabond material
- Applications
- Short Wall Bracing
- Wall Heights up to 2.7m
- Product Specification
- Material Specification
Two individually cut pieces of Hoop Iron Bracing are required to brace a timber framed wall section. These pieces should overlap to form an ‘X’.
Secure first end of one piece of bracing into position using 30 x 2.8mm Dunnings’ nails.
Stretch the Hoop Iron Bracing over the entire panel to be braced, ensuring the brace is taut.
Secure the second end while maintaining tension on the brace.
Repeat this procedure for the second piece of Hoop Iron Bracing, ensuring an ‘X’ is formed.
Secure the Hoop Iron Tensioner in each length of Hoop Iron Bracing to remove any remaining slack.
Applications above non-loadbearing bracing walls
A. Wrap ends of Hoop Iron Bracing around plate and fix with nails (Refer Detail B)
B. Attach minimum 1.0 x 30mm Hoop Iron Bracing with 2/30 x 2.8mm BN Dunnings’ nails into each stud
C. Hoop Iron Tensioner
D. Minimum 70 x 35-F5 Wall Stud
E. Stud Ties or 1/T-Plate (both sides of frame)
F. Tie-down as per AS1684/ minimum M10 Chemset
Bracing Capacity (kN) for Unit Width (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Panel Type | 600 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 |
Short Wall Bracing | 1.5 | 2.2 | 2.7 | 3.0 | 3.3 | 3.6 | 3.8 | 4.0 | 4.1 | 4.2 |
Specification | Product Code |
|---|---|
1.0mm Structural Hoop Iron – G300 – Z275 – Punched | |
1.0 x 30mm Perforated Galvanised - 6m Roll | D327 |
1.0 x 30mm Perforated Galvanised - 10m Roll | BHI10HPH |
1.0 x 30mm Perforated Galvanised - 15m Roll | BHI15HPH |
1.0 x 30mm Perforated Galvanised - 20m Roll | BHI20HPH |
1.0 x 30mm Perforated Galvanised - 30m Roll | BHI30HPH |
1.0 x 30mm Perforated Galvanised - 50m Roll | BHI50HPH |
0.8mm Structural Hoop Iron – G300 – Z275 - Punched | |
0.8 x 30mm Perforated Galvanised - 6m Roll | D325 |
0.8 x 30mm Perforated Galvanised - 10m Roll | BHI10HP |
0.8 x 30mm Perforated Galvanised - 15m Roll | BHI15HP |
0.8 x 30mm Perforated Galvanised - 20m Roll | BHI20HP |
0.8 x 30mm Perforated Galvanised - 30m Roll | BHI30HP |
0.8 x 30mm Perforated Galvanised - 30m Roll (Boxed) | BHI30HPB |
0.8 x 30mm Perforated Galvanised - 50m Roll | BHI50HP |
0.8mm Hoop Iron – G300 – Z275 – Unpunched | |
0.8 x 30mm Plain Unpunched Galvanised - 6m Roll | D322 |
0.8 x 30mm Plain Unpunched Galvanised - 5kg Roll | BHI5H |
0.6mm Strapping Iron – Z275 – Punched | |
0.6 x 25mm Perforated Galvanised - 6m Roll | D326 |
0.6 x 25mm Perforated Galvanised - 15m Roll | BHI25615 |
0.6 x 25mm Perforated Galvanised - 30m Roll | BHI25630 |
Thickness: | 0.8mm/1.0mm |
Material: | G300-Z275 |